Wheel Adapter Parts.
Flanges.

Performance always matters, even for as basic an item as a flange; and performance begins with design. We make flanges with customer safety in mind. Check these design features and you’ll know what we’ve known for a long time, SAFETY FIRST!

• BEARING SURFACES GROUND FLAT AND PARALLEL to assure maximum uniform wheel contact.

• PRECISION GROUND OD AND ID for optimum CONCENTRICITY AND BALANCE.
• SPECIALLY SELECTED ALLOY STEEL HEAT TREATED FOR MAXIMUM STRENGTH AND TOUGHNESS.
• FLANGES ARE RECESSED to produce equal and opposite bearing surfaces, keeping stress away from the wheel bore.

	00040
CATALOG NO. PART NO. DIMENSIONS A B LARGE DIAMETER FLANGES     00040 4.0SP 4 5/16 00450 4.5SP 4-1/2 5/16 00475 4.75SP 4-3/4 5/16 00050 5.0SP 5 5/16 00550 5.5SP 5-1/2 5/16 00575 5.75SP 5-3/4 5/16 00603 6.0SP 6 5/16 00065 6.5SP 6-1/2 5/16 00675 6.75SP 6-3/4 5/16 00700 7.0SP 7 5/16 00075 7.5SP 7-1/2 5/16 00080 8.0SP 8 3/8

CATALOG NO.  PART NO. DIMENSIONS A B C SMALL DIAMETER FLANGES       00051 F3 1-1/2 1/4 0.375 00052 - 2 5/16 0.375 00053 F4 1-1/2 1/4 0.500 00054 F1 2 5/16 0.500 00056 - 2 5/16 0.625 00058 F2 2 5/16 0.750 00059 - 2-1/2 5/16 1.000 05322 - 3 5/16 0.500 00060 - 3 5/16 0.625 01280 - 3 5/16 0.750	00056
	00058

CATALOG NO. PART NO. DIMENSIONS         A         WICK FLANGES       00042 WICK-3 3-1/4     00044 WICK-4 4-1/4     00046 WICK-5 5-1/4         Electro less nickel plating available on all flanges and spacers at additional cost.

00042

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

1   2   3   4   5   6   7