Wheel Adapter Parts
Keyed Washers
Even the simple adapter washer is not too trivial to be overlooked in our attention to detail. Single-tang washer designs set up inherent out-of-balance conditions that are avoided with products manufactured with equal and opposite adapter hub key slots and DUAL-TANG washers. The separation provided by a washer prevents potential frictional wheel damage caused by nut contact, assuring every machine operator of safe wheel lock that is less likely to loosen under a load than ordinary adapters.
|
|
 |
|||||
| 00034 | 00012 | 05518 | ||||
|
|
||||||
| 00000 | 00062 | 00008 | 00032 | |||
| CATALOG NO. | DIMENSIONS | DESCRIPTIONS | ||||
|
|
||||||
| A | B | C | ||||
| 00000 | 1-3/4 | 1/16 | 1-1/4 | For X200-1 & X200-2 adapters | ||
| 00003 | 1.85 | 1/16 | 1-1/4 | For ANCA MG7 series adapters | ||
| 00004 | 2 | 1/16 | 1-1/4 | For Pope adapters 00529,00530,00531,00532,00533 | ||
| 00030 | 2-1/4 | 1/32 | 1-1/4 | |||
| 00005 * | 2-1/4 | 1/32 | 1-1/4 | Electro less nickel plated | ||
| 00006 | 2-1/4 | 1/32 | 1-1/4 | Stainless steel | ||
| 00062 | 2-1/4 | 1/16 | 1-1/4 | |||
| 00007 | 2-1/4 | 1/16 | 1-1/4 | For 222RWA adapter only | ||
| 00008 * | 2-1/4 | 1/16 | 1-1/4 | Electro less nickel plated | ||
| 00009 | 2-1/4 | 1/16 | 1-1/4 | Stainless steel | ||
|
|
||||||
| 00447 | 2-5/16 | 1/32 | 1-1/4 | |||
|
|
||||||
| 01250 | 2-3/8 | 1/32 | 1-1/4 | |||
|
|
||||||
| 00031 | 2-7/16 | 1/32 | 1-1/4 | |||
| 00032 | 2-7/16 | 1/16 | 1-1/4 | |||
|
|
||||||
| 00010 | 3 | 1/32 | 1-1/4 | |||
| 00033 | 3 | 1/16 | 1-1/4 | |||
| 00011 * | 3 | 1/16 | 1-1/4 | Electroless nickel plated | ||
| 00012 | 3 | 1/16 | 2 | For ANCA TG7 series adapters | ||
|
|
||||||
| 00016 | 3-1/2 | 1/32 | 1-1/4 | |||
| 00034 | 3-1/2 | 1/16 | 1-1/4 | |||
|
|
||||||
| 00035 | 4-1/8 | 1/16 | 2 | For IMM adapter 00691 | ||
| 00019 | 4-1/8 | 1/16 | 3 | For shrouded adapter 00691 AND 00692 | ||
|
|
||||||
| 04250 | 4-1/4 | 1/16 | 1-1/4 | For larger wheel adapters 00696, 00555 | ||
| 00023 | 4-1/4 | 1/16 | 2 | |||
| 05518 | 4-1/4 | 1/8 | 3 | For larger wheel adapters 01316, 01317 | ||
|
|
||||||
| 04293 | 4-3/4 | 1/8 | 3 | For Norton S-3 balancing adapters 00824 | ||
|
|
||||||
| 05519 | 5 | 1/8 | 3 | For larger wheel adapters 01324, 01330, 01337, 01338 | ||
|
|
||||||
| 05307 | 7 | 1/8 | 5 | For larger wheel adapters 01335, 01336 | ||
| * In stock, but Electro less nickel plating is available for all washers at additional cost. | ||||||
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
adapter 1 adapter 2 adapter 3 adapter 4 adapter 5 adapter 6 adapter 7