| CATALOG NO. | PART NO. | DIMENSIONS | DESCRIPTIONS |
|
| A | B | D |
|
| 00024 | S-110NR | 1-3/8 | 1/4 | 3/4-16RH | For S-110 Monoset adapter |
|
| 05529 | - | 1-5/8 | 1/4 | 1-20LH | For 1" ID wheel extension |
| 05530 | - | 1-5/8 | 1/4 | 1-20RH | For 1" ID wheel extension |
| 00155 | X-200-NL | 1-3/4 | 1/4 | 1-1/4-16LH | For X-200-1 adapter |
| 00185 | X-200-NR | 1-3/4 | 1/4 | 1-1/4-16RH | For X-200-2 adapter |
|
| 00296 | 913-0-00-1006 | 1.85 | .39 | 1-1/4-16RH | For ANCA MG7 series adapters |
|
| 00067 | - | 50 MM (1.97”) | 10 MM (0.39”) | 1-1/4-16RH | For ANCA RGX adapters, has two #10-32 00939 nylon-tipped set screws on O.D. |
|
| 04284 | - | 1-7/8 | 1/4 | 11/16-24LH | For Wickman adapter 00676, two #10-32
tapped holes in face |
|
| 05113 | - | 2 | 1/4 | 3/4-16RH | For S-111 Monoset adapter |
| 04276 | - | 2 | 5/16 | 1-1/4-16LH | For Wickman adapter 00677, 00678 & 50074, two #10-32
tapped holes in face |
| 00145 | - | 2 | 9/32 | 1-1/4-16LH | For Wickman adapter 00677 with two #10-32
tapped holes in face. |
|
| 00416 | W-401-NL | 2-1/8 | 5/16 | 1-1/4-16LH | For Pope adapters 00529 and 00532 |
| 00425 | W-401-NR | 2-1/8 | 5/16 | 1-1/4-16RH | For Pope adapters 00530, 00531, and 00533 |
|
| 00020 | 200-NL | 2-1/4 | 5/16 | 1-1/4-16LH | |
| 00186 | AN-200NL | 2-1/4 | 5/16 | 1-1/4-16LH | Has two #10-32 00939 nylon-tipped set screws on O.D. |
| 00187 | AN-200NR | 2-1/4 | 5/16 | 1-1/4-16RH | Has two #10-32 00939 nylon-tipped set screws on O.D. |
| 00599 * | EN-200-NL | 2-1/4 | 5/16 | 1-1/4-16LH | Electro less nickel plated |
| 01238 | SS-200-NL | 2-1/4 | 5/16 | 1-1/4-16LH | Stainless steel |
| 00021 | 200-NR | 2-1/4 | 5/16 | 1-1/4-16RH | |
| 00796 * | EN-200-NR | 2-1/4 | 5/16 | 1-1/4-16RH | Electro less nickel plated |
| 01229 | SS-200-NR | 2-1/4 | 5/16 | 1-1/4-16RH | Stainless steel |
| 04279 | - | 2-1/4 | 3/8 | 1-1/2-16LH | For Abrasive adapter 00813 |
|
| 00643 | - | 2-5/16 | 1/4 | 1-1/4-16RH | |
|
| 00682 | - | 2-3/8 | 5/16 | 1-1/4-16RH | |
|
| 00223 | 220-NL | 2-7/16 | 3/8 | 1-1/4-16LH | |
| 00224 | 220-NR | 2-7/16 | 3/8 | 1-1/4-16RH | |
| 01228 * | EN-220-NR | 2-7/16 | 3/8 | 1-1/4-16RH | Electro less nickel plated |
|
| 01243 | EU230NL | 3 | 5/16 | 1-1/4-16LH | For ball location adapter 00738 (has clearance angle on OD) |
| 00273 | 230-NL | 3 | 3/8 | 1-1/4-16LH | |
| 01110 * | EN-230-NL | 3 | 3/8 | 1-1/4-16LH | Electro less nickel plated |
| 00274 | 230-NR | 3 | 3/8 | 1-1/4-16RH | |
| 00703 * | EN-230-NR | 3 | 3/8 | 1-1/4-16RH | Electro less nickel plated |
| 00156 | 96.5301.5001 | 3 | 3/8 | 2-16RH | For ANCA TG7 series adapters |
| 04253 | - | 3 | 7/16 | 2-16LH | For Huffman adapters |
| 04252 | - | 3 | 7/16 | 2-16RH | For Huffman adapters |
|
| * In stock, but Electro less nickel plating is available for all nuts at additional cost |