Wheel Adapters for Grinding Machines
Manufactured by
ANCA, Victoria, Australia.
HSK50EMOD TAPER AND 19º 05' 06" INC ANGLE
TAPER WITH .85" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" AND 2.000" ID WHEELS
Quality Anca FASTGRIND adapters are made for the operator expecting the highest standard of performance required by today's fast set-up times and short production runs. This standard with quality features like PRECISION GROUND TAPERS for reliable spindle mating and CONCENTRICALLY GROUND AND SQUARE surfaces to optimize cutting conditions and prolong wheel life. Hub OD threads are THREAD GROUND to assure safe, square wheel locking conditions. Every Anca adapter is furnished complete with a spindle mounting bolt, lock washer and recessed washer
  |
|
CATALOG NO |
ANCA PART NO | A | C | D | MACHINE |
| 50356 | - | 2-5/32 | 4-3/4 | 1-1/4-16RH | TGX |
| 01137* | - | 2-5/32 | 4-3/4 | 1-1/4-16RH | TGX |
| 00318 | - | 3-3/8 | 6-11/32 | 2-16RH | TGX |
| * For cup wheel use | |||||
  |
 |
|
FIG.1 |
|
CATALOG No. |
FIG. | ANCA PART No. | DIMENSIONS | ||
| A | C | MACHINE | |||
| 00621 | 1 | AT901-0-00-0175 | 2-1/8 to 2-3/8 | 3-3/16 | TG4 |
| 00622 | 1 | AT901-0-00-0175-1 | 3-5/8 | 4-3/8 | TG4 |
| 00623 | 1 | AT901-0-00-0179 | 1-1/8 to 1-3/8 | 2-3/16 | TG4 |
| 00624 | 1 | AT901-0-00-0183 | 1/4 to 1/2 | 1-5/16 | TG4 |
| 00620 | 2 | AT901-0-00-0174 | 1/2 | 4-7/8 | TG4 |
ROTATION:
RH: Right-hand threads for CCW spindle rotation
LH: Left-hand threads for CW spindle rotation