| | | Bridgeport Mill Parts List Clock Spring Assembly Quill Spring Hub, quill feed speed handle Elevating Screw Cross Feed Nut variable speed belt |
|
Wheel Adapters for Grinding Machines Manufactured by ANCA, Victoria, Australia
3.500" TPF WITH 1.02", AND 1.38" DIAMETER AT LARGE END OF TAPER. FOR 1.250" AND 2.000" ID WHEELS
| Anca FASTGRIND adapters are made for the operator expecting the highest standard of performance required by today's fast set-up times and short production runs. This standard with quality features like PRECISION GROUND TAPERS for reliable spindle mating and CONCENTRICALLY GROUND AND SQUARE surfaces to optimize cutting conditions and prolong wheel life. Hub OD threads are THREAD GROUND to assure safe, square wheel locking conditions and you can expect years of performance from these FASTGRIND adapters because each one is heat treats. Every Anca adapter is furnished complete with a spindle mounting bolt, lock washer and recessed washer |  |
CATALOG No. | FIG. | ANCA PART No. | DIMENSIONS | | A | B | C | D | G | H | MACHINE | | 00625 | 1 | AT902-0-00-5026 | 1-1/8 to1-1/4 | 3 | 2-3/16 | 2-16RH | 1.38 | 2.000 | TG7/DM7 | | 00626 | 1 | AT902-0-00-5027 | 1-7/8 to 2 | 3 | 2-31/32 | 2-16RH | 1.38 | 2.000 | TG7/DM7 | | 50063 | 1 | - | 2-5/8 | 3 | 3-9/16 | 2-16RH | 1.38 | 2.000 | TG7/DM7 | | 00823 | 1 | AT937-0-00-1009 | 3-1/4 | 3 | 4-1/8 | 2-16RH | 1.38 | 2.000 | TG7/DM7 | | 00627 | 1 | - | 3-3/8 to 3-1/2 | 3 | 4-3/8 | 2-16RH | 1.38 | 2.000 | TG7/DM7 | | 00822 | 1 | AT937-0-00-1010 | 4-3/8 | 3 | 5-5/16 | 2-16RH | 1.38 | 2.000 | TG7/DM7 | | 50163 | 2 | AT902-0-01-5037 | 2 | 2 | 4.613 | 1-1/4-16RH | 1.38 | 1.250 | TG7/DM7 | | 00628 | 1 | AT913-0-00-1024 | 1-1/8 | 1-31/32 | 1-31/32 | 1-1/4-16RH | 1.02 | 1.250 | MG7/RG7 | | 00629 | 1 | AT913-0-00-1025 | 1-7/16 to 1-1/2 | 1-31/32 | 2-3/8 | 1-1/4-16RH | 1.02 | 1.250 | MG7/RG7 | | 50186 | 1 | - | 2-1/8 | 1-31/32 | 3-1/32 | 1-1/4-16RH | 1.02 | 1.250 | MG7/RG7 | | 50187 | 1 | - | 2-5/8 | 1-31/32 | 3-1/2 | 1-1/4-16RH | 1.02 | 1.250 | MG7/RG7 | | 50188 | 1 | - | 3-1/8 | 1-31/32 | 4 | 1-1/4-16RH | 1.02 | 1.250 | MG7/RG7 | | 50350* | 1 | - | 2-1/2 | 3 | 3-7/16 | 2-16RH | 1.02 | 2.000 | MG7/RG7 | | 00496** | 1 | AT913-2-00-1010 | 1-1/2 to 1-3/4 | 1-31/32 | 2-5/8 | 1-1/4-16RH | 1.02 | 1.250 | RGX | | 00521*** | 1 | AT913-2-00-1020 | 2 to 2-1/2 | 1-31/32 | 3-19/64 | 1-1/4-16RH | 1.02 | 1.250 | RGX | | 00398*** | 1 | AT913-2-00-1030 | 2-5/8 to 3 | 1-31/32 | 3-13/16 | 1-1/4-16RH | 1.02 | 1.250 | RGX | | 00879*** | 1 | AT913-2-00-1040 | 3 to 3-3/8 | 1-31/32 | 4-7/32 | 1-1/4-16RH | 1.02 | 1.250 | RGX |
* Allows use of 2" ID wheels on MG7/RG7 machines.** Includes two 5MM spacers 01305, one 10MM spacer 01310, and bi-directional nut 00067. *** Includes two 5MM spacers 01305, two 10MM spacers 01310, and bi-directional nut 00067. ANCA Spacer Accessories ROTATION:
RH: Right-hand threads for CCW spindle rotation
LH: Left-hand threads for CW spindle rotation 1 2 3 |
| |