| Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
| Right Angle System  |  | | The 1027 drawbar is required with the RIGHT ANGLE SYSTEM. | |
ARBORS Arbors are designed for horizontal milling and for use with the Right Angle Attachment and Auxiliary Arbor Support. The Arbors are hardened and ground and have wrench flats on the shoulders.  | 
| | Stub mill holders come complete with securing nut and 1/8", 1/4", 3/8",1/2" and 7/8" wide arbor spacer. | Left hand arbors available upon request. Arbor assembly includes nut, key and spacers
* Arbor assembly includes nut, key and spacers |
| PART NO | A | B | C | KEY SIZE | THREAD DIR. | | ARBOR ASSEMBLY
PART NO* | THREAD DIR. | A | B | C | D | | 006-0247 | 1/2" | 2 3/4" | 1 " | 1/4" | right | | 006-0267 | right | 14 29/32" | 3/4" | 9 9/32" | 1/2" | | 006-0248 | 1/2" | 2 13/16" | 1 1/4" | 5/16" | right | | 006-0269 | right | 15 1/32" | 7/8" | 9 9/32" | 1/2" | | | | | | | | | 006-0271 | right | 15 7/32" | 1" | 9 17/32" | 1 1/16" | | | | | | | | | 006-0273 | right | 15 15/32" | 1 1/4" | 9 21/32" | 1 1/16" |
SPACERS *Other spacer lengths available upon request.  | PART NO | I.D | LENGTH | FOR USE
WITH ARBOR
DIA. OF | QTY SUPPLIED
WITH ARBOR
ASSY. | | 006-0265 | 3/4 | 2 | 3/4 | 3 | | 006-0259 | 3/4 | 5/8 | 3/4 | 2 | | 006-0255 | 3/4 | 5/16 | 3/4 | 3 | | 006-0046 | 7/8 | 2 | 7/8 | 3 | | 006-0040 | 7/8 | 5/8 | 7/8 | 2 | | 006-0036 | 7/8 | 5/16 | 7/8 | 3 | | 006-0063 | 1 | 2 | 1 | 3 | | 006-0058 | 1 | 3/4 | 1 | 2 | | 006-0053 | 1 | 5/16 | 1 | 2 | | 006-0080 | 1 1/4 | 2 | 1 1/4 | 3 | | 006-0075 | 1 1/4 | 3/4 | 1 1/4 | 2 | | 006-0071 | 1 1/4 | 3/8 | 1 1/4 | 2 |
Micro Adjustment Spacing Collar  | Reduce milling set-up time Set up time is cut in half and trial and error adjustment time eliminated with the Micro-Adjustment Spacing collar. No need for wasted cost on shim stock. It provides accurate spacing that you can't get with shims. | Calibrated Adjustment Made Easy The collar is calibrated in one thousandths of an inch. A one quarter thousandth can easily be made by visual calibration. You can make any adjustment, plus or minus with a simple turn of the collar. Just loosen cutter arbor nut and adjust collar with wrench provided. |
| PART NO | SIZE OF CUTTER ARBOR | MAX. OUTSIDE DIA. | MIN. THICKNES | MAX. ADJUSTMENT | | 1008 | 7/8 | 1 9/16 | 3/8 | 3/32 | | 1009 | 1 | 1 13/16 | 3/8 | 3/32 | | 1010 | 1 1/4 | 2 1/16 | 3/8 | 3/32 | | 1011 | 1 1/2 | 2 7/16 | 1/2 | 3/16 | | 1012 | 2 | 3 1/16 | 1/2 | 3/16 | Collars are available to fit cutting arbors from 7/8" to 2". Comes complete with adjustment wrench and keys. |
| | |