For newer style Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. Adapter locked on spindle taper with bolt | CATALOG NO. | FIG | DIMENSIONS | | A | B | C | D | | 00108** | 1 | 3/4 to 1 | 2-1/4 | 2 | 1-1/4-16LH | | 00253** | 1 | 3/4 to 1 | 2-1/4 | 2 | 1-1/4-16RH | | 00278* | 1 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16LH | | 00239* | 1 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16RH | | 00279* | 1 | 1/4 to 1/2 | 2 | 1-3/8 | 1-1/4-16RH | | 00407** | 1 | 2 | 2-1/4 | 3 | 1-1/4-16LH | | 00408** | 1 | 2 | 2-1/4 | 3 | 1-1/4-16RH | | 00409** | 1 | 1 to 2 | 2-1/4 | 3 | 1-1/4-16LH | | 00411** | 1 | 1 to 2 | 2-1/4 | 3 | 1-1/4-16RH | | 00282* | 2 | 1/4 to 1/2 | 3 | 1-3/8 | 1-1/4-16LH | | 00283* | 2 | 1/4 to 1/2 | 3 | 1-3/8 | 1-1/4-16RH | | 00284* | 2 | 1/4 to 1/2 | 3-1/2 | 1-3/8 | 1-1/4-16LH |
*Spindle mounting bolt 14362 and retaining ring 04269 included
**Includes spindle mounting bolt 14362 but no retaining groove or ring
For older style Cincinnati flat belt, center drive spindles. No keyway in taper. Adapter locked on spindle taper with spindle nut* 
| CATALOG No. | FIG | DIMENSIONS | | A | B | C | D | | 00103 | 1 | 3/4 to 1 | 2-1/4 | 2 | 1-1/4-16LH | | 00104 | 1 | 3/4 to 1 | 2-1/4 | 2 | 1-1/4-16RH | | 00205 | 1 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16LH | | 00206 | 1 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16RH | | 00280 | 1 | 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16RH | | 00281 | 1 | 1/4 to 1/2 | 2 | 1-3/8 | 1-1/4-16RH | | 00442 | 1 | 2 | 2-1/4 | 3 | 1-1/4-16LH | | 00443 | 1 | 2 | 2-1/4 | 3 | 1-1/4-16RH | | 00444 | 1 | 1 to 2 | 2-1/4 | 3 | 1-1/4-16LH | | 00445 | 1 | 1 to 2 | 2-1/4 | 3 | 1-1/4-16RH | | 00109 | 2 | 3/4 to 1 | 3 | 2 | 1-1/4-16RH | | 00287 | 2 | 1/4 to 1/2 | 3 | 1-3/8 | 1-1/4-16LH | | 00288 | 2 | 1/4 to 1/2 | 3 | 1-3/8 | 1-1/4-16RH |
*Spindle mounting nut not included
ROTATION:
RH: Right-hand threads for CCW spindle rotation
LH: Left-hand threads for CW spindle rotation |
| 
