Cincinnati Taper New Style I.D. Wheel Extensions
4.500"
TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR .500" ID
WHEELS
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT
SAVE BOTH THE EXPENSE AND SET-UP TIME OF A HIGH SPEED
ATTACHMENT
Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. The 3/8-16RH thread on the arbor 04271 acts as a draw thread to pull the extension onto the taper and a 3/4" wrench flat makes installation and removal easy. The extension comes complete with two 1-1/2" mating side flanges 00053 (F4), a 1/2-13RH hex spindle nut 05002, and an extension body 04272
|
|
|||||
|
55000 |
|
CATALOG No |
PART No |
| 55000 | |
Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper and furnished with two 2" mating side flanges 00054 (F1), a 1/2-13RH hex spindle nut 05002, and an extension body 04272. The 3/8-16RH thread on the arbor 04271 acts as a draw thread to pull the extension onto the taper, and a 3/4” wrench flat makes installation and removal easy
 |
|
||
|
00483 |
| CATALOG No |
| 00483 |
Standard taper (3.000" TPF) ID wheel extension adapters
ROTATION:
RH: Right-hand threads for CCW spindle
rotation
LH: Left-hand threads for CW spindle rotation
cincinnati taper 1 cincinnati taper 2 cincinnati taper 3 cincinnati taper 4 cincinnati taper 5 cincinnati taper 6 cincinnati taper 7 cincinnati taper 8 cincinnati taper 9 cincinnati taper 10 cincinnati taper 11 cincinnati taper 12