Cincinnati Taper Wheel Adapters With Glare Gear Assembly
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS. USED ON ALL CINCINNATI NO. 1 AND NO. 2 SPINDLES, COVEL, AND GALLMEYER & LIVINGSTON CUTTER GRINDERS; OR ANY SPINDLES WITH .87" DIAMETER AT LARGE END OF TAPER AND 4.500" TPF
For newer style Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. Adapter locked on spindle taper with bolt
![]() | ![]() |
01116** | ![]() |
| CATALOG NO. | DIMENSIONS | ||||
| A | B | C | D | ||
| 01125 | 3/4 to 1 | 2-1/4 | 2 | 1-1/4-16RH | |
| 00571 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16LH | |
| 01116 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16RH | |
*Spindle mounting bolt 14362 and retaining ring 04269 included
**Grinding wheel not included
For older style Cincinnati flat belt, center drive spindles. No keyway in taper.
Adapter locked on spindle taper with spindle nut*
![]() | ![]() |
00909 |
| CATALOG NO. | DIMENSIONS | ||||
| A | B | C | D | ||
| 00909 | GGC200-1 | 1/4 to 1/2 | 2-1/4 | 1-3/8 | 1-1/4-16LH |
* Spindle mounting nut not included
**Grinding wheel not included
ROTATION:
RH: Right-hand threads for CCW spindle rotation
LH: Left-hand threads for CW spindle rotation



