Cincinnati Taper Reversible Wheel Adapters

4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
 DESIGNED FOR 1.250" ID DIAMOND, CBN, AND VITRIFIED WHEELS

THERE IS A DIFFERENCE WITH  REVERSIBLE ADAPTERS!

• Formed wheels are used either way, without redressing.

• Can be REVERSED without DISMOUNTING the wheel for prolonged square corner life of diamond wheels.

•   Reversible wheel adapters make it possible to use the same dressed angle for BOTH RIGHT AND LEFT GROUND TOOL BITS.

• EASY TO USE-Just remove the adapter from the spindle nose and REMOUNT in the reverse direction.

• SAFE TO USE reversible wheel adapters are manufactured with a double-taper, and are securely locked against loosening by the wheel rotation. Manufactured from quality steel, then HARDENED AND GROUND to withstand the rigors of daily use.

CINCINNATI TAPER "OLD STYLE" REVERSIBLE WHEEL ADAPTER. A precision ground double-taper makes wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. Designed for the older Cincinnati flat belt center drive spindles, the adapter comes complete with a 1/2-13LH 06074 and a 1/2-13RH 06073 slotted spindle nut.

CATALOG No. DIMENSIONS A D 00122  1/4 to 1/2 1-1/4-16RH

CINCINNATI TAPER "NEW STYLE" REVERSIBLE WHEEL ADAPTER. A precision ground double-taper makes wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. Designed for the newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. The adapter comes complete with a 3/8-16RH mounting bolt 14362.

CATALOG NO. DIMENSIONS A D 00123 1/4 to 1/2 1-1/4-16RH

1   2   3   4   5   6   7   8   9  10   11   12