Wheel Adapters for Abrasive Gardner DeVlieg, and ELB Grinders
2.972" TPF, 3.000" TPF, AND 11° 20'
INC ANGLE TAPER WITH 1.12", 1.00", AND
.98" DIAMETER AT LARGE END OF TAPER. FOR 3.000" AND 1.250"
ID WHEELS
| The 00813 ABRASIVE (GARDNER)
No. 1-1/2, 10"x15" manual surface grinder adapter
features a 13/16" deep shrouded design to keep contaminants
away from the spindle. To maximize cutting conditions and to prolong wheel life, PRECISION GROUND TAPERS, and CONCENTRIC AND SQUARE SURFACES. OD threads are GROUND and hubs and nuts are HEAT TREATED FOR STRENGTH. |
|
 |
 |
|
00813 |
|
|
CATALOG No. |
|
DIMENSIONS |
|
|
|
|||
|
A |
|||
|
00813 |
|
1/2 to 2 |
|
| The 00191 DEVLIEG MICRO-POINT GRINDER ADAPTER is designed for plate-mounted grinding wheels with the abrasive medium bonded to a steel wheel. Four 1/4-20 tapped holes, used to lock the wheel in place, are positioned on a 2" diameter center-line. Assembled with hub and 3/8" spacer, 1/4-20 screws are not included | |
 |
 |
|
00191 |
|
|
CATALOG No. |
PART No. |
|
00191 |
DV262 |
For older ELB GRINDERS and new MIGHTY FREEPORT 618 GRINDERS.
 |
 |
|
00177 |
|
CATALOG No. |
|
DIMENSIONS |
|
|
|
|||
|
A |
C |
||
|
00177 * |
3/8 to 1/2 |
1-3/4 |
|
|
00178 * |
3/4 to 1 |
2-1/4 |
|
|
00179 * |
1 to 2 |
3-3/16 |
|
* For small Elb surface grinders.
Larger Elb adapters can be manufactured as specials.
ROTATION:
RH: Right-hand threads for CCW spindle
rotation.
LH: Left-hand threads for CW spindle rotation