Warranty

 All repairs carry a full warranty.

BridgePort Parts
 

Clausing -Colchester - Gisholt - Hardinge - Hitachi - LeBlond - Monarch - Mori Seiki - Nardini - Warner & Swasey - Sheldon - South Bend

Mills

Acer - Bridgeport - Clausing - Cincinnati -Exato - Kondia -Lagun - Max Mill - Supermax

Grinders
Grinders

Boyar & Schultz - Blanchard - Bryant - Norton - Brown & Sharp - Chevalier - Clausing - Cincinnati - DoAll - Grand Rapids - Harig - Heald - Hitachi - K.O. - Lee - Parker Majestic - Reid - Thompson

Press Brakes

Accupress - Acro - Betenbender - Dake - Diacro - HTC - Roper Whitney

Shears

Accushear - American Hercules - Acro - All Steel - Clausing - Cidan - Dacro - Edwards - HTC - Niagara - Pexto - Ursviken Hydraulic Shear

Hydraulic/Pneumatic

 

Rexroth / Bosch Group - Norgren - HYDAC - Balluff - CPC - Anderson Fittings - DESTACO - Clippard Minimatic - Freelin-Wade -Canfield Connector - Rital - Enertrols - JG John Guest USA,Inc. - Humphrey -Foster - SUN Hydraulics - Moeller -HIWIN - Thom









Glare Gear Nut Assembly

 

CAN BE USED ON ANY 1.250" ID WHEEL ADAPTERS. THE UNIQUE GRINDING WHEEL LOCKING SYSTEM THAT ELIMINATES DAMAGE TO GRINDING WHEELS AND SPINDLE BEARINGS CAUSED BY HAMMERING. PROVIDES THE BEST POSSIBLE MOUNTING CONCENTRICITY WHEN TIGHTENING DIAMOND WHEELS. FITS ALL STANDARD 1-1/4"-16LH OR 1-1/4"-16RH THREA

The GLARE GEAR NUT ASSEMBLY eliminates the use of a spanner wrench when recessed, cup type, or rubber grinding wheels are mounted on surface grinders, cutter grinders, or small OD grinders. The machine operator can securely lock the grinding wheel with the GLARE GEAR NUT ASSEMBLY without touching the wheel itself. Deep recess wheels are locked easily. The GLARE GEAR NUT ASSEMBLY saves time and money. There is less chance of wheel breakage and no skinned knuckles!

The standard adapter keyed washer is replaced by a larger diameter keyed washer with two 1/4" holes 180° apart. The T-shaped key has a pilot and gear teeth that engage teeth on the OD of the locking nut. Rotating the key locks the nut securely against the washer without hammering. Assembly includes washer, nut, and key.

Note: Relieved face locks against grinding wheel.

 

 

 
CATALOG NO.

 
01901   3 piece assembly with 1-1/4-16LH threads.
01902   3 piece assembly with 1-1/4-16RH threads.
01903 *   3 piece assembly with 1-1/4-16RH threads and electro less nickel finish.
01918   3 piece assembly with 1-1/4-18LH threads for old style B&S adapter.
01919   3 piece assembly with 1-1/4-18RH threads for old style B&S adapter.
01921   3 piece assembly with 1-17/64-20LH threads for old style K.O. Lee adapter.
01906   Key.
01909   Washer. 2.40" OD, 1-1/4" ID, 3/16" thick.
01912   1-1/4-16LH nut only.
01907   1-1/4-16RH nut only.
01908   1-1/4-18LH nut only for old style B&S adapter.
01904   1-1/4-18RH nut only for old style B&S adapter.
01905   1-17/64-20LH nut only for old style K.O. Lee adapter.

 

Glare Gear Nuts can be furnished with all 1-1/4" ID adapters.
* In stock, but electro less nickel plating is available for all Glare Gear assemblies and component parts at additional cost.

For Complete selection of Stocked Adapters with Glare Gear Assembly

 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.