Standard Taper Short I.D. Wheel Extensions

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
 FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
 SAVE THE EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT

All SHORT IDWEs come with a floating nut spacer 00662 (FN-1), two flanges, and a wheel end-nut. The hex spindle nut must be selected separately to suit your machine. Most grinders use 1/2-13LH or 1/2-13RH threads. A 1-1/4" wrench flat on the body makes installation and removal easy.  See page 76 for available hex spindle nut sizes.

CHECK THESE FEATURES!

ALL DIAMETERS GROUND for concentricity.

PRECISION INTERNAL TAPER for proper spindle mating.

ALL COMPONENT PARTS HEAT TREATED for strength and long life.

THREAD GROUND EXTERNAL THREADS for maximum concentricity and squareness.

SPECIALS can be made to your requirements. Please specify wheel OD, width, and ID.

CATALOG NO. PART NO. DIMENSIONS A B C D 00759 200-3/8LH-S 1/2 to 3/4 1-1/2 3-7/8 3/8-16LH HEX 00760 200-3/8RH-S 1/2 to 3/4  1-1/2 3-7/8 3/8-16RH HEX 00761   1/2 to 3/4 2 3-7/8 3/8-16LH HEX 00762   1/2 to 3/4 2 3-7/8 3/8-16RH HEX 00763 200-1/2LH-S 3/8 to 5/8 1-1/2 3-7/8 1/2-13LH HEX 00764 200-1/2RH-S 3/8 to 5/8 1-1/2 3-7/8 1/2-13RH HEX 00765   3/8 to 5/8 2 3-7/8 1/2-13LH HEX 00766   3/8 to 5/8 2 3-7/8 1/2-13RH HEX 00769   1/2 2 3-7/8 5/8-18LH HEX 00770   1/2 2 3-7/8 5/8-18RH HEX 00773   1/2 2 4 3/4-16LH HEX 00774 1/2 2 4 3/4-16RH HEX 00775 200-1LH-S 1/2 2-1/2 4 1-20LH ROUND 00776 200-1RH-S 1/2 2-1/2 4 1-20RH ROUND *For smaller wheels, ID wheel extensions can be supplied with wheel screws. For Available Flanges

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation

 1         2       3       4       5       6       7       8       9       10       11       12       13       14       15       16      17       18       19       20       21       22     23       24       25      26       27