Standard Taper Long I.D. Wheel Extensions
3.000" TPF WITH 1.00" DIAMETER AT LARGE
END OF TAPER.
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
SAVE BOTH THE EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT
All LONG IDWEs come with a floating nut spacer 00662
(FN-1), two flanges, and a wheel end-nut. The hex spindle nut must be
selected separately to suit your machine. Most grinders use
1/2-13LH or 1/2-13RH threads. A 13/16” wrench flat on the step makes
installation and removal easy. See page 76 for available hex spindle
nut sizes. Extends grinding wheels 13/16" further from spindle
nose than the short series ID wheel extensions shown on page 16.
 |
 |
|
| 00777 | 00783 | |
 |
||
| 00787 | 00791 | |
| CATALOG NO. | PART NO. | DIMENSIONS | ||||
|
|
||||||
| A | B | C | D | |||
| 00777 | 200-3/8LH-L | 1/2 to 3/4 | 1-1/2 | 4-13/16 | 3/8-16LH HEX | |
| 00778 | 200-3/8RH-L | 1/2 to 3/4 | 1-1/2 | 4-13/16 | 3/8-16RH HEX | |
| 00779 | 1/2 to 3/4 | 2 | 4-13/16 | 3/8-16LH HEX | ||
| 00780 | 1/2 to 3/4 | 2 | 4-13/16 | 3/8-16RH HEX | ||
|
|
||||||
| 00781 | 200-1/2LH-L | 3/8 to 5/8 | 1-1/2 | 4-13/16 | 1/2-13LH HEX | |
| 00782 | 200-1/2RH-L | 3/8 to 5/8 | 1-1/2 | 4-13/16 | 1/2-13RH HEX | |
| 00783 | 3/8 to 5/8 | 2 | 4-13/16 | 1/2-13LH HEX | ||
| 00784 | 3/8 to 5/8 | 2 | 4-13/16 | 1/2-13RH HEX | ||
|
|
||||||
| 00787 | 1/2 | 2 | 4-13/16 | 5/8-18LH HEX | ||
| 00788 | 1/2 | 2 | 4-13/16 | 5/8-18RH HEX | ||
|
|
||||||
| 00791 | 1/2 to 1 | 2 | 4-13/16 | 3/4-16LH HEX | ||
| 00792 | 1/2 to 1 | 2 | 4-13/16 | 3/4-16RH HEX | ||
*For smaller wheels ID wheel extensions can be supplied with wheel screws.
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27