Standard Taper Reversible Wheel and Adapters

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.  DESIGNED FOR 1.250" ID DIAMOND, CBN, AND VITRIFIED WHEELS

THERE IS A DIFFERENCE WITH REVERSIBLE ADAPTERS!

Formed wheels are used either way without redressing.

Can be REVERSED without DISMOUNTING the wheel for prolonged square corner life of diamond wheels.

Reversible wheel & adapters make it possible to use the same dressed angle for
BOTH RIGHT AND LEFT GROUND TOOL BITS.

EASY TO USE-Just remove the adapter from the spindle nose and REMOUNT in the reverse direction.

SAFE TO USE  reversible wheel & adapters are manufactured with a double-taper and are securely locked against loosening by the wheel rotation.

Manufactured from quality steel to withstand the rigors of daily use, then HARDENED and Ground

For use on all spindles having a 3.000" TPF with 1.00" diameter at large end of taper.  Including: Boyar-Schultz, Bridgeport, Brown & Sharpe, DoAll, Excello, Foote Burt-Hammond, Harig, Norton, Parker Majestic, Pope, Reid, Sanford, Setco, Taft Pierce, and Whitnon.

A precision ground double-taper and removable bushing make wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. LH thread is standard.
CATALOG NO. PART NO.  DIMENSIONS A B D 00222   222RWA 1/4 to 1/2 2-1/4 1-1/4-16LH 00255  222RWA-R 1/4 to 1/2 2-1/4 1-1/4-16RH 00256 4.5-2RWA 0 to 1/2 4-1/2 1-1/4-16RH 00022 22-W Replacement tapered bushing.

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

  1       2       3       4       5       6       7       8      9       10       11       12       13        14      15       16      17       18       19       20      21      22      23       24       25       26       27