Standard Taper Electroless Nickel Plated Adapters

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
 FOR 1.250" ID WHEELS

When corrosive coolants pose special problems, choose ELECTROLESS NICKEL PLATED wheel & adapters to reduce the high cost of replacement. Widely used in ELECTROLYTIC GRINDING machine applications and the RUBBER ROLL GRINDING INDUSTRY, Electroless Nickel plating deposits a uniformly dense coating of nickel-phosphorus alloy onto the adapter surface.

A HARD PROTECTIVE SHELL providing outstanding protection against wear and abrasion.

AN ECONOMICAL ALTERNATIVE to stainless steel or hard chrome finishes.

UNCOMMON CORROSION RESISTANCE to today’s harsh coolant environments.

CATALOG NO. PART NO. DIMENSION A C D E 00345 EN100-1 1/2 to 3/4 1-7/8 1-1/4-16LH - 00346 EN100-2 1/2 to 3/4 1-7/8 1-1/4-16RH - 00347 EN100-1C 3/4 1-7/8 1-1/4-16LH - 00348 EN200-1 1/4 to 1/2 1-3/4 1-1/4-16LH - 00349 EN200-2 1/4 to 1/2 1-3/4 1-1/4-16RH - 00350* ENA200-1 1/4 to 1/2 1-3/4 1-1/4-16LH 3/16 00351* ENA200-2  1/4 to 1/2 1-3/4 1-1/4-16RH 3/16 00352** ENK200-1 1/8 to 1/2 1-3/4 1-1/4-16LH - 00353** A2031-1 1/8 to 5/8 1-3/4 1-1/4-16LH - 00355 EN200-1C 1/2 1-3/4 1-1/4-16LH - 00364 EN300-1 3/4 to 1 2-1/4 1-1/4-16LH - 00365 EN300-2 3/4 to 1 2-1/4 1-1/4-16RH - 00368 EN300-1C 1 2-1/4 1-1/4-16LH - 00369 EN300-2C 1 2-1/4 1-1/4-16RH - 00356 A2031-2 3/8 to 1 2-1/4 1-1/4-16LH - 00366 EN300-1B 1-1/2 2-11/16 1-1/4-16LH - 00367 EN300-2B 1-1/2 2-11/16 1-1/4-16RH - 00370 A2031-5 3/8 to 1-1/2 2-11/16 1-1/4-16LH -   Electroless nickel plating available on all adapters at additional cost.   *Comes with two #10-32 nylon-tipped set screws 00939 on nut OD for reversing rotation applications.   ** Keyway to face.

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation

  1     2     3     4     5     6     7     8     9     10     11     12     13     14     15     16     17     18     19     20     21       22     23     24     25     26     27