Standard Taper Electroless Nickel Plated Adapters

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS

When corrosive coolants pose special problems, choose ELECTROLESS NICKEL PLATED wheel & adapters to reduce the high cost of replacement. Widely used in ELECTROLYTIC GRINDING machine applications and the RUBBER ROLL GRINDING INDUSTRY, Electroless Nickel plating deposits a uniformly dense coating of nickel-phosphorus alloy onto the adapter surface.

Electroless Nickel coatings offer you...

A HARD PROTECTIVE SHELL providing outstanding protection against wear and abrasion.

AN ECONOMICAL ALTERNATIVE to stainless steel or hard chrome finishes.

UNCOMMON CORROSION RESISTANCE to today’s harsh coolant environments.

00373	00377	FIG.1

/ / /> CATALOG NO. FIG. PART NO. DIMENSIONS A C D 00371 1 EN400-1A 2 3-3/16 1-1/4-16LH 00372 1 EN400-2A 2 3-3/16 1-1/4-16RH 00373 1 EN400-1B 1 to 2 3-3/16 1-1/4-16LH 00374 1 EN400-2B 1 to 2 3-3/16 1-1/4-16RH 00376 /1 EN500-1A 3 4-3/16 1-1/4-16LH/ 00377 /1 EN500-1B 2 to 3 4-3/16 1-1/4-16LH/ 00378 /1 A2031-4 1-3/4 to 3 4-3/16 1-1/4-16LH/ 00379 1 EN600-1A 4 5-3/16 1-1/4-16LH 00357 2 EN200-1LH1-5/8 1/4 to 1/2 3-3/8 1-1/4-16LH

Electroless nickel plating available on all adapters at additional cost.

FIG.2

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 1      2      3      4      5       6      7      8      9      10      11      12       13      14      15      16      17        18      19    20      21      22      23        24      25      26      27