Warranty

 

Bridgeport milling machine Parts
ball screw

Clausing -Colchester - Gisholt - Hardinge - Hitachi - LeBlond - Monarch - Mori Seiki - Nardini - Warner & Swasey - Sheldon - South Bend

Mills

Acer - Bridgeport - Clausing - Cincinnati -Exato - Kondia -Lagun - Max Mill - Supermax

Grinders
Grinders

Boyar & Schultz - Blanchard - Bryant - Norton - Brown & Sharp - Chevalier - Clausing - Cincinnati - DoAll - Grand Rapids - Harig - Heald - Hitachi - K.O. - Lee - Parker Majestic - Reid - Thompson

Press Brakes

Accupress - Acro - Betenbender - Dake - Diacro - HTC - Roper Whitney

Shears

Accushear - American Hercules - Acro - All Steel - Clausing - Cidan - Dacro - Edwards - HTC - Niagara - Pexto - Ursviken Hydraulic Shear

Hydraulic/Pneumatic

 

Rexroth / Bosch Group - Norgren - HYDAC  - CPC - Anderson Fittings - DESTACO - Clippard Minimatic - Freelin-Wade -Canfield Connector - Rital - Enertrols - JG John Guest USA,Inc. - Humphrey -Foster - SUN Hydraulics - Moeller -HIWIN - Thom









Standard Taper Electroless Nickel Plated Adapters

 

 

 

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
 FOR 1.250" AND 3.000" ID WHEELS

 

If corrosive coolants pose special problems for you, choose ELECTROLESS NICKEL PLATED wheel adapters to reduce the high cost of replacement. Widely used in ELECTROLYTIC GRINDING machine applications and the RUBBER ROLL GRINDING industry, Electroless Nickel plating deposits a uniformly dense coating of nickel-phosphorus alloy onto the adapter surface.

 

Electroless Nickel coatings offer you...

A HARD PROTECTIVE SHELL providing outstanding protection against wear and abrasion.

AN ECONOMICAL ALTERNATIVE to stainless steel or hard chrome finishes.

UNCOMMON CORROSION RESISTANCE to today’s harsh coolant environments.

 


 

FIG.1

01112

00651

FIG.2
00358 00360

 

CATALOG NO. FIG. PART NO. DIMENSIONS
A B C D H
00140 1 EN220-1 1/4 to 1/2 2-7/16 1-3/4 1-1/4-16LH 1.250
00358 1 EN220-2 1/4 to 1/2 2-7/16 1-3/4 1-1/4-16RH 1.250
00359 1 EN330-1 3/4 to 1 3 2-1/4 1-1/4-16LH 1.250
00360 1 EN430-1B 1 to 2 3 3-1/4 1-1/4-16LH 1.250
01111 1 EN430-2B 1 to 2 3 3-1/4 1-1/4-16RH 1.250
01914 * 1 ENB430-1B 1 to 2 3 3-1/4 1-1/4-16LH 1.250
00361 * 1 ENB430-2B 1 to 2 3 3-1/4 1-1/4-16RH 1.250
01112 2 EN4.5-1 0 to 1/2 4-1/2 1-7/8 1-1/4-16LH 1.250
00974 2 EN4.5-2 0 to 1/2 4-1/2 1-7/8 1-1/4-16RH 1.250
00380 2 EN4.5-1-3 3/8 to 1 4-1/2 2-3/8 1-1/4-16LH 3.000
50397 2 EN5.0-1 0 to 1/2 5 1-7/8 1-1/4-16LH 1.250
01249 2 EN5.5-1 0 to 1/2 5-1/2 1-7/8 1-1/4-16LH 1.250
00136 2 EN6.0-1 0 to 1/2 6 1-7/8 1-1/4-16LH 1.250
00137 2 EN6.0-2 0 to 1/2 6 1-7/8 1-1/4-16RH 1.250
00651 2 EN6.5-2 0 to 1/2 6-1/2 1-7/8 1-1/4-16RH 1.250

 

Electroless nickel plating available on all adapters at additional cost.

 

*Balancing style adapter.

 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 

 

 

 1       2      3      4       5      6      7       8      9      10      11     12      13      14      15      16      17      18      19      20      21      22      23      24      25    26      27