Standard Taper Wheel Adapter

Standard Taper Flanged Wheel and Adapters

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS.
DESIGNED FOR THIN CUT-OFF WHEELS AND DIAMOND WHEELS

Flanged adapters are machined from alloy steel. The resulting one piece hub design distributes mounting pressure away from the bore, the weakest part of the grinding wheel. The inherent rigidity of one piece design, and the precision ground flanges provide identical radial load bearing surfaces for positive wheel lock and better spindle driving torque to the abrasive wheel. All surfaces are ground concentric and square for optimum surface finishes. Completely heat treated, flanged adapters are safe to use and maintain their rigidity.


CATALOG NO.	PART NO.	DIMENSIONS
CATALOG NO.	PART NO.	A	B	D
00451	4.5-1	0 to 1/2	4-1/2	1-1/4-16LH
00452	4.5-2	0 to 1/2	4-1/2	1-1/4-16RH
00138	5.0-1	0 to 1/2	5	1-1/4-16LH
00139	5.0-2	0 to 1/2	5	1-1/4-16RH
00551	5.5-1	0 to 1/2	5-1/2	1-1/4-16LH
00552	5.5-2	0 to 1/2	5-1/2	1-1/4-16RH
00610	6.0-1	0 to 1/2	6	1-1/4-16LH
00612	6.0-2	0 to 1/2	6	1-1/4-16RH
00650	6.5-1	0 to 1/2	6-1/2	1-1/4-16LH
00652	6.5-2	0 to 1/2	6-1/2	1-1/4-16RH

For Available Flanges Adapters

ROTATION:

RH: Right-hand threads for CCW spindle rotation.

LH: Left-hand threads for CW spindle rotation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27