Warranty

 All repairs carry a full warranty.

BridgePort Parts
 

Clausing -Colchester - Gisholt - Hardinge - Hitachi - LeBlond - Monarch - Mori Seiki - Nardini - Warner & Swasey - Sheldon - South Bend

Mills

Acer - Bridgeport - Clausing - Cincinnati -Exato - Kondia -Lagun - Max Mill - Supermax

Grinders
Grinders

Boyar & Schultz - Blanchard - Bryant - Norton - Brown & Sharp - Chevalier - Clausing - Cincinnati - DoAll - Grand Rapids - Harig - Heald - Hitachi - K.O. - Lee - Parker Majestic - Reid - Thompson

Press Brakes

Accupress - Acro - Betenbender - Dake - Diacro - HTC - Roper Whitney

Shears

Accushear - American Hercules - Acro - All Steel - Clausing - Cidan - Dacro - Edwards - HTC - Niagara - Pexto - Ursviken Hydraulic Shear

Hydraulic/Pneumatic

 

Rexroth / Bosch Group - Norgren - HYDAC - Balluff - CPC - Anderson Fittings - DESTACO - Clippard Minimatic - Freelin-Wade -Canfield Connector - Rital - Enertrols - JG John Guest USA,Inc. - Humphrey -Foster - SUN Hydraulics - Moeller -HIWIN - Thom









Standard Taper Balancing Wheel and Adapters for Small Surface Grinders

 

3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
 FOR 1.250" ID WHEELS

 

Balancing rings have milled pockets with 180° arc-length. One end of the arc is permanently stamped with a reference line and arrow to designate direction of rotation. Unlike some balancing rings, “sandwiches” the milled pockets together inside the mated faces. Grinding grit can’t build up! Rings are lapped flat and ground for a precision fit. A nylon-tipped set screw secures each ring to the adapter hub. All balancing adapters furnished with a 3/32" hex wrench 00938.

 

00565

00106

 CATALOG NO.  PART NO.

DIMENSIONS
A C D E
00106 B100-1 1/2 to 3/4 1-7/8 1-1/4-16LH -
00107 B100-2 1/2 to 3/4 1-7/8 1-1/4-16RH -
00260 B200-1 1/4 to 1/2 1-3/4 1-1/4-16LH -
00262 B200-2 1/4 to 1/2 1-3/4 1-1/4-16RH -
00310 B300-1 3/4 to 1 2-1/4 1-1/4-16LH -
00311 B300-1B 1-1/2 2-11/16 1-1/4-16LH -
00313 B300-1C 1 2-1/4 1-1/4-16LH -
00312 B300-2 3/4 to 1 2-1/4 1-1/4-16RH -
50331** ANB300-2 3/4 to 1 2-1/4 1-1/4-16RH 3/16
00338 B300-2B 1-1/2 2-11/16 1-1/4-16RH -
00404 B400-1A 2 3-3/16 1-1/4-16LH -
00405 B400-2A 2 3-3/16 1-1/4-16RH -
00410 B400-1B 1 to 2 3-3/16 1-1/4-16LH -
00412 B400-2B 1 to 2 3-3/16 1-1/4-16RH -
00504 B500-1A 3 4-3/16 1-1/4-16LH -
00565 B500-1B 2 to 3 4-3/16 1-1/4-16LH -
00505 B500-2A 3 4-3/16 1-1/4-16RH -
50305 B600-1B 3 to 4 5-3/16 1-1/4-16LH -
50393 B1000-1A 8 9-3/16 1-1/4-16LH -

 

**Furnished with two #10-32 nylon-tipped set screws 00939 on nut OD for reversing rotation

00228

  

 

 CATALOG NO. PART NO.

DIMENSIONS
A C D F
00228 B200-1LH1-5/8 1/4 to 1/2 3-3/8 1-1/4-16LH 2-5/16
00229 B200-2RH1-5/8 1/4 to 1/2 3-3/8 1-1/4-16RH 2-5/16
00244 B200-1LH2-3/4 1/4 to 1/2 4-1/2 1-1/4-16LH 3-7/16
00219 B200-2RH2-3/4 1/4 to 1/2 4-1/2 1-1/4-16RH 3-7/16

 

For Large Taper Balancing Adapters For Large Grinders

 

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use Balancing Adapters to:

  • Increase productivity.

  • Reduce downtime and maintenance.

  • Produce low micro-finishes.

  • Reduce wheel wear and truing frequency.

  • Reduce costly spindle failures.

 

 

 

 

 

 

 

 

 

wheel adapter 1     wheel adapte 2     wheel adapter 3     wheel adapter 4     wheel adapter 5     wheel adapter 6     wheel adapter 7     wheel adapter 8     wheel adapter 9     wheel adapter 10     wheel adapter 11     wheel adapter 12     wheel adapter 13     wheel adapter 14     wheel adapter 15     wheel adapter 16     wheel adapter 17     wheel adapter 18     wheel adapter 19     wheel adapter 20     wheel adapter 21     wheel adapter 22     wheel adapter 23     wheel adapter 24     wheel adapter 25     wheel adapter 26       wheel adapter 27